I'm a little puzzled about some of the results from PSU program.
For I1 I have 100mA stepped to 170mA (after 3 seconds). In the same way I have I2 4mA stepped into 8mA after 4 seconds.
When I ran the results after 20 seconds I see I1 = 100mA and I2 = 8mA. I don't think I1 should be 100mA but 170mA (especially after 20 seconds). To me the final currents should be 170mA and 8mA.
The current through the choke is 178mA (which is correct).
Am I doing something wrong here?
Second picture shows the transient time at the beginning of the simulation.
Thank you,
For I1 I have 100mA stepped to 170mA (after 3 seconds). In the same way I have I2 4mA stepped into 8mA after 4 seconds.
When I ran the results after 20 seconds I see I1 = 100mA and I2 = 8mA. I don't think I1 should be 100mA but 170mA (especially after 20 seconds). To me the final currents should be 170mA and 8mA.
The current through the choke is 178mA (which is correct).
Am I doing something wrong here?
Second picture shows the transient time at the beginning of the simulation.
Thank you,