Just looking for a little advice on what to look for on my Arcam Alpha 10 Integrated Amplifier. I bought it second hand a few years back and after a short initial period did not have the space for a HiFi having moved house.
When I got the space again recently and connected it back up I found that the right channel of Speaker A connections was completely dead. Speaker B works on both channels. I opened the casing up hoping for a nice simple fuse to replace such as on my A60, but no such luck.
I am far from an expert, but I can use a soldering iron and a multimeter, as well as follow directions. Any hints would be fantastic.
When I got the space again recently and connected it back up I found that the right channel of Speaker A connections was completely dead. Speaker B works on both channels. I opened the casing up hoping for a nice simple fuse to replace such as on my A60, but no such luck.
I am far from an expert, but I can use a soldering iron and a multimeter, as well as follow directions. Any hints would be fantastic.