Hi would a 6sn7 pse amp be possible by tying the anodes for both halves together with the load being a hammond 125ase wired for 10k ohms with an 8 ohms speaker. However due to the speakers I am using with the amp being 604E, I can expect a load of 20k ohms on the primary of the transformer. Each cathode will have a Rk of 1k ohms and each grid will have a resistor of 470k ohms to ground.
I understand that this amp will only be capable of much less than a watt, however I would love to try this circuit out.
Thanks in advance.
I understand that this amp will only be capable of much less than a watt, however I would love to try this circuit out.
Thanks in advance.